Draper 98678 - Fitting the Integrated Detergent Bottle; Assembling the Lance and Hose

– 13 –
8. ASSEMBLY
8.4 FITTING THE INTEGRATED
DETERGENT BOTTLE - FIGS. 5 - 6
Fill the detergent bottle (8) with a suitable
detergent. Slot the bottle onto the back of the
pressure washer and attach the cap, making sure
the hose goes into the detergent liquid.
8.5 ASSEMBLING THE LANCE AND
HOSE - FIGS. 7 - 8
Connect the end of the hose the the spray gun
lance (15) by screwing the end connection in
place. Make sure it is connected securely before
use.
5
6
FIG.
FIG.
7
8
FIG.
FIG.
(8)
(15)