OPERATION Cont’d
- 11 -
4. Fill the detergent bottle with detergent to the
required level See Fig.17. Follow manufacturer’s
directions for concentration to be used.
5. Refit the bottle to the spray nozzle assembly as
shown in Fig.18.
6. Switch the machine ‘ON’ See Fig.19.
7. Aim the detergent spraying attachment in the
required direction and pull the trigger.
Detergent will now spray from the attachment
See Fig.20 to stop the spraying release the
trigger.
Fig.17.
Fig.18.
Fig.19.
Fig.20.
PW2000, PW2110 AND PW2121 Cont’d
3. Fit the detergent spraying attachment to the
handle assembly in the same way as when
fitting the lance assembly See Fig.16.
Fig.16.
To Next Page
Loading...
