Draper PW2000 - Page 13

OPERATION Cont’d
- 12 -
PW2130
PRESSURE CLEANING
The output water pressure is adjustable, and is
controlled by knob 0Fig.21. Turn the knob
clockwise to increase the pressure, anti-clockwise
to decrease.
The output pressure is indicated on the gauge 1
Fig.22. Draper Tools recommends that before
carrying out any cleaning operations always test a
small inconspicuous part of the area to be cleaned
to check that it is suitable.
The spray lance nozzle is adjustable and can
either produce a powerful pencil jet of water or a
less powerful fan jet of water See Fig.23 & 24.
This is done by rotating the head.
1. To operate the machine switch the machine on
See Fig.25.
IMPORTANT NOTE: When working the machine
should be in the horizontal position, the upright
position is for transportation and storage only.
Fig.21.
Fig.24.
Fig.22.
Fig.23.
Fig.25.
0
1