Off Wireless funct ion is disabled.
Blinking
It will blink slowly while wireless t raf f ic goes
t hrough.
ACT and WLAN LEDs blink quickly and
simult aneously when WPS is working, and will
ret urn t o normal condit ion aft er t wo minut es.
(You need t o set up WPS wit hin 2 minut es. )
WAN1, WAN2 / P6
On The port is connect ed.
Off The port is disconnect ed.
Lef t LED
Blinking The dat a is t ransmit t ing.
On The port is connect ed wit h 1000Mbps.
Right LED
Off The port is connect ed wit h 10/ 100Mbps.
LAN P1- P5
On The port is connect ed.
Off The port is disconnect ed.
Lef t LED
Blinking The dat a is t ransmit t ing.
On The port is connect ed wit h 1000Mbps.
(2)
Right LED
Off The port is connect ed wit h 10/ 100Mbps