Wireless LAN
ON/OFF/WPS
WLAN On - Press the button and release it within 2 seconds.
When the wireless function is enabled, the green LED will be
on
WLAN Off - Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless function is not
enabled, the LED will be off
When WPS is enabled in the router’s web interface, press this
button for more than 2 seconds to enable WPS pairing mode
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press gently
and hold for more than 5 seconds. When the ACT LED blinks
rapidly, release the button and the router will restart with its
factory default configuration.
USB1~USB2 Connector for a USB 3G/4G modem, storage, printer or USB
Thermometer.
GigaLAN1~LAN4
GigaLAN4 can be configured as the Ethernet WAN port, see
Section 5.3 for details
DSL
RJ-11 connector for ADSL or VDSL line
I / O
Power Switch. Turns the unit on (I) or off (O)
PWR Connector for the power adapter
To Next Page
Loading...
Need help?
General
