Vigor2912 Series User’s Guide
311
RIP Direction - The option specifies the direction of RIP
(Routing Information Protocol) packets. You can
enable/disable one of direction here. Herein, we provide
four options: TX/RX Both, TX Only, RX Only, and
Disable.
From first subnet to remote network, you have to
do - If the remote network only allows you to dial in with
single IP, please choose NAT, otherwise choose Route.
Change default route to this VPN tunnel - Check this box
to change the default route with this VPN tunnel.
2. After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
