Draytek VigorFly 200 User Manual

Draytek VigorFly 200 Specifications

General

Brand	Draytek
Model	VigorFly 200
Category	Wireless Router
Language	English

Summary

Preface

1.2 LED Indicators and Connectors

1.3 Hardware Installation

Details the physical steps required to connect the router and its accessories correctly.

Configuring Basic Settings

2.1 Two-Level Management

2.2 Accessing Web Page

2.3 Changing Password

Guides users on how to change the router's administration password for security.

2.4 Quick Start Wizard

Provides a step-by-step wizard for quick deployment and basic setup of the router.

User Mode Operation

3.1 WAN

Covers Wide Area Network settings, including connection modes and setup.

3.1.1 Internet Access

Details how to configure WAN connection types like Static IP, DHCP, PPPoE, PPTP/L2TP, and 3G USB Modem.

3.1.2 3G Backup

3.2 LAN

Covers Local Area Network settings, including network structure and IP addressing.

3.2.1 General Setup

3.3 NAT

Explains Network Address Translation and its benefits for cost saving and security.

3.3.1 Open Ports

3.3.2 DMZ Host

3.4 Applications

3.4.1 Dynamic DNS

3.5 Wireless LAN

Covers basic concepts and configuration of the router's wireless LAN capabilities.

3.5.2 General Setup

3.5.3 Security

Details how to set up wireless security modes like WEP, WPA/PSK, and WPA2/PSK.

3.5.4 Universal Repeater

3.6 System Maintenance

Covers essential system maintenance tasks like status checks, password changes, and firmware upgrades.

3.6.1 System Status

3.6.2 User Password

3.6.4 Firmware Upgrade

Details the process of downloading and upgrading the router's firmware.

3.7 Diagnostics

Admin Mode Operation

4.1 WAN

Covers Wide Area Network settings and connection modes accessible in admin mode.

4.1.1 Internet Access

Details configuring WAN connection types like Static IP, DHCP, PPPoE, PPTP/L2TP, and 3G USB Modem.

4.1.2 3G Backup

4.2 LAN

Covers Local Area Network settings and structure in admin mode.

4.2.1 General Setup

4.2.2 Static Route

4.3 NAT

Explains Network Address Translation and its role in mapping private to public IP addresses.

4.3.1 Open Ports

4.3.2 DMZ Host

4.4 Firewall

Covers firewall basics and protection against unauthorized access and attacks.

4.4.1 DoS Defense

4.4.2 MAC/IP/Port Filtering

4.4.3 System Security

4.4.4 Content Filtering

4.5 Applications

4.5.1 Dynamic DNS

4.5.5 UPnP Configuration

4.6 Wireless LAN

Covers advanced wireless LAN settings including security, WDS, and WPS.

4.6.2 General Setup

4.6.3 Security

Details advanced wireless security configurations for WPA, WPA2, and WEP.

4.6.4 Access Control

4.6.5 WPS

4.6.6 WDS

4.6.7 Universal Repeater

4.7 System Maintenance

Covers essential system maintenance tasks including status, password, backup, and firmware.

4.7.1 System Status

4.7.2 Administration Password

4.7.3 User Password

4.7.4 Configuration Backup

4.7.7 Management

4.7.8 Reboot System

4.7.9 Firmware Upgrade

Details the process of upgrading the router's firmware using the upgrade utility.

4.8 Diagnostics

Trouble Shooting

5.1 Checking If the Hardware Status Is OK or Not

Guides on verifying the router's hardware status and checking connections.

5.2 Checking If the Network Connection Settings on Your Computer Is OK or Not

Helps users check and correct their computer's network connection settings.

5.3 Pinging the Router from Your Computer

Explains how to use the 'ping' command to check the router's link status.

5.4 Checking If the ISP Settings are OK or Not

Guides on verifying that the ISP settings configured on the router are correct.

5.5 Forcing Vigor Router into TFTP Mode for Performing the Firmware Upgrade

Details how to force the router into TFTP mode for firmware upgrade.

5.6 Backing to Factory Default Setting If Necessary

Explains how to reset the router to factory default settings via software or hardware.