Vigor2912 Series User’s Guide
347
the word is specified for accessing into web pages of Vigor
router only. Also, it is reserved for FTP firmware upgrade
usage.
Note: FTP Passive mode is not supported by Vigor Router.
Please disable the mode on the FTP client.
Password
Type the password for FTP/SMB users for accessing FTP
server. Later, you can open FTP client software and type
the password specified here for accessing into USB storage
disk. The length of the password is limited to 11 characters.
Confirm Password
Type the password again to make confirmation.
Home Folder
It determines the folder for the client to access into.
The user can enter a directory name in this field. Then, after
clicking OK, the router will create the specific/new folder
in the USB storage disk. In addition, if the user types “/”
here, he/she can access into all of the disk folders and files
in USB storage disk.
Note: When write protect status for the USB storage disk is
ON, you cannot type any new folder name in this field.
Only “/” can be used in such case.
You can click
to open the following dialog to add any
new folder which can be specified as the Home Folder.
Access Rule
It determines the authority for such profile. Any user, who
uses such profile for accessing into USB storage disk, must
follow the rule specified here.
File – Check the items (Read, Write and Delete) for such
profile.
Directory –Check the items (List, Create and Remove) for
such profile.
Before you click OK, you have to insert a USB storage disk into the USB interface of the
Vigor router. Otherwise, you cannot save the configuration.
To Next Page
Loading...
Need help?
General
