Vigor2912 Series User’s Guide
371
The maximum length of the text is limited to 23 characters.
Notification Host IP
(IPv4)
Set the IPv4 address of the host that will receive the trap
community.
Notification Host IP
(IPv6)
Set the IPv6 address of the host that will receive the trap
community.
Trap Timeout
The default setting is 10 seconds.
Enable SNMPV3 Agent
Check it to enable this function.
USM User
USM means user-based security mode.
Type a username which will be used for authentication. The
maximum length of the text is limited to 23 characters.
Auth Algorithm
Choose one of the encryption methods listed below as the
authentication algorithm.
Auth Password
Type a password for authentication. The maximum length
of the text is limited to 23 characters.
Privacy Algorithm
Choose one of the methods listed below as the privacy
algorithm.
Privacy Password
Type a password for privacy. The maximum length of the
text is limited to 23 characters.
Click OK to save these settings.
To Next Page
Loading...
Need help?
General
