22
3
3
.
.
3
3
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
Click Wireless LAN >>General Settings to configure the Service Set Identifier (SSID)
and wireless channel.
1. Check the box Enable Wireless LAN to enable wireless function.
2. Select an appropriate wireless mode.
Mixed
(11b+11g+Super
G)
The router can connect to IEEE802.11b, IEEE802.11g and
Super G stations simultaneously. If you don’t know which one
is suitable for your router, please choose this mode.
Mixed (11b+11g)
The router can connect to IEEE802.11b and IEEE802.11g
stations simultaneously.
Super G only
The router can connect to Super G stations.
11g-only
The router can connect to IEE802.11g stations.
11b-only
The router can connect to IEE802.11b stations.
3. Type in the name of the SSID and Channel. The default name for SSID is "default".
We suggest you change it to a particular name.
SSID (service set
identifier)
It is used to name the wireless LAN for this router, and it must
have the same content in client PC/notebook wireless card(s).
SSID can be any text numbers or various special characters.
Channel
It is a wireless channel for the router. The default channel is 6.
You can change it to an appropriate one if the selected channel
is under serious interference.
To Next Page
Loading...
Need help?
General
