- 28 -
4 IMPORTANT NOTICES
4.1 INSTALLATION REGULATIONS
- Check and exchange the Mg anode regularly.
- No closing armature may be mounted between the tank and the safety valve.
- If the overpressure in the eater main exceeds 0.6 MPa, a reduction valve must be mounted
before the safety valve.
- All outlets of hot water must be equipped with a combination faucet.
- Prior to the first filling the tank with water we recommend that the receptacle's flange
connection nuts are tightened.
- It is not allowed to handle the thermostat, aside from temperature resetting with a control
button.
- All electric installation handling, setting, and regulation feature exchange, may only be
implemented by a service company.
Both the electric and water installation must follow and meet the requirements and
regulations relevant in the country of use!
4.2 SPARE PARTS
G3/4" safety valve is packed with the product and the OKC 100, 125 NTR and OKC 100, 125, 160 NTR/ HV
types are additionally equipped with a discharge valve. The OKC NTR/Z and OKCV NTR types packaging
include suspension elements and thermometer.
It is in your own interest to check the completeness of the accessories.
4.3 DISPOSAL OF PACKAGING MATERIAL AND NON-
FUNCTIONING APPLIANCE
A service fee for providing return and recovery of packaging material has
been paid for the packaging in which the product was delivered. The service
fee was paid pursuant to Act No 477/2001 Coll., as amended, at EKO-KOM
a.s. The client number of the company is F06020274. Take the water boiler
packages to a waste disposal place determined by the town. When the
operation terminates, disassemble and transport the discarded and
unserviceable heater to a waste recycling centre (collecting yard), or contact
the manufacturer.
30-3-2016
To Previous Page
Loading...
