Dražice OKC 250 NTR - Emergency Power Consumption

- 5 -
quality of HSW,
- Integrated protective magnesium anode increases corrosion resistance,
- Quality polyurethane insulation ensures minimum heat losses,
- Smoothly settable HSW temperature up to 74°C,
- multiple supply points,
- in types with two exchangers, possibility of using two hot water supplies or, via a
combination of those, obtain double heat-transfer surface,
- light indication of the heater's run,
- HSW temperature control,
- Possibility of connecting HSW circulation.
1.2.3 EMERGENCY POWER CONSUMPTION
If no heated water is taken from the tank, a small amount of heat leaks. This loss is
measured for a period of 24 hours at the temperature of 65°C in the heater, and at 20°C in
its ambient area. The resulting value is expressed in units [kWh/24h] and indicates the
amount of power needed to maintain the set temperature. Data sheet - see Table 1.
TYPE
Heating
water flow
(l/h)
Pressure
loss (mbar)
OKC 100 NTR
720
33
OKC 125 NTR
46
OKC 160 NTR
46
OKC 200 NTR
46
OKC 250 NTR
46
OKC 200 NTRR
2 x 33
OKC 250 NTRR
2 x 33
Table 1