3
UNBOXING
Upon receiving your DreamCast Firepit, take care to check all parts
have been received according to the included packing slip.
ATTENTION: Fragile! Concrete may chip or scratch if collided
with other hard materials such as stone, metal, or other concrete.
HANDLE WITH CARE!
Remove the concrete parts from the crate, unwrap and place them on
a soft surface. Take care when handling concrete parts as concrete is
brittle and can chip or flake if struck. Inspect all parts for shipping
damage. Any shipping damage must be reported immediately. We
allow for 48 hours after receipt for any shipping damage to be claimed
under warranty. Please contact DreamCast Design if you are missing
any parts.
SET-UP
Before placing your DreamCast Firepit, check that the desired location
meets all clearances to combustibles listed in the Fire Pit Clearances
Diagram. Ensure that the final location for the fire pit is as flat and level
as possible. Make sure to provide adequate drainage beneath the
opening in the base of the fire pit body.
Carefully lift the fire pit or fire pit base and place it in its final position. If
there is a gas riser, fire pit should be placed so that the stub is
enclosed within the fire pit.
If the fire pit does not sit level, shim appropriately so that
it is level and evenly supported. If the fire pit has a top section,
carefully lift and place it on top of its base. Ensure that the provided
rubber shims are installed between the top and base. Check that the
top section is level and stable. If it does not sit level or is unstable,
shim as required with additional rubber shims.
Follow the assembly instructions in this manual to connect the burner
assembly, test for gas leaks, and place decorative burner media.
CONCRETE CARE
Your new DreamCast fire pit is factory sealed to resist staining and
discoloration. However, care should be taken to maintain the
premium concrete finish.
Concrete is a very porous material and may stain from certain
substances left on the surface. Things that may stain if not removed
include red wine, acidic juices, oils and waxes, tree sap and other
organic material. Additionally, water trapped under an object for an
extended period can leave a watermark.
We strongly recommend covering your firepit with a breathable,
weather resistant cover when not in use.
MAINTENANCE
Your concrete fire pit can be cleaned with a soft cloth and mild soap
to remove dirt and scuffs.
The surface can be periodically cleaned and refreshed
with our DreamCast Refresh Sealer. Please contact us for more
information and to order Refresh Sealer.
Scratches and chips can be repaired with our patch kit, though any
repairs made to concrete will be visible.
Your DreamCast Concrete Firepit
This Owner’s Guide and Instruction Manual contains critical information for the safe installation operation and
maintenance of your DreamCast fire feature. You must read this manual in its entirety prior to installation
and/or operation.
CAUTION - HEAVY
Use care when lifting and placing to avoid injury and damage to
property and the fire pit itself.
Fire pits will require 2 or more people to lift.
To Next Page
Loading...