Dreame D10 Plus User Manual

12
Connect to a power outlet and start charging
Place the base on level ground against the wall and connect it to a power outlet. Place the
robot onto the base to charge. The robot will turn on automatically and begin charging. It is
recommended to fully charge your robot before first-time use.
Note:
 Keep the immediate area 1.5m in front of the base and 0.5 m to its both sides clear of
objects.
 Make sure that no objects might block the signalling area.
About the Auto-Empty Base
It is recommended that the robot set out from the base before cleaning. Do not move the
base while the robot is cleaning. This ensures that the robot returns to base smoothly.
After the robot completes the cleaning task and automatically returns to the base, the base
will start auto-empty. More settings can be operated on the APP.
Within the
Good Wi-Fi
Range
Put away the power cord into
the cords storage slot

Dreame D10 Plus Specifications

General

Shape	Round
Product color	White
Number of wheels	2 wheel(s)
Remotely operated	Yes
Dust container type	Combi
Brush type	Roller brush & Side brush
Noise level	- dB
Navigation type	3D Smart Navigation
Number of brushes	3
Integrated sensors	Laser
Water tank capacity	0.145 L
Dust capacity (base)	2.5 L
Dust capacity (total)	2.9 L
Base station functions	Charging, Purification
Vacuum cleaner programs	-
Floor surfaces supported	Carpet, Hard floor, Laminate, Linoleum, Parquet, Wood
Dust capacity (vacuum cleaner)	0.4 L
Battery life	250 m²
Battery voltage	19.8 V
AC input voltage	220-240 V
Battery capacity	5200 mAh
AC input frequency	50-60 Hz
Power consumption (typical)	46 W
Number of filters	3 pc(s)
Quantity per pack	9 pc(s)
Package type	Box
Product type	Accessory kit
Brand compatibility	Dreame
Suitable for vacuum cleaner type	Robot vacuum
Warranty period	1 year(s)

Weight and Dimensions

Depth	350 mm
Width	349 mm
Height	96.3 mm
Base station dimensions (W x D x H)	303 x 403 x 399 mm