Press and hold for 5
seconds to enter the filter
reset countdown screen.
When appears on the
screen, it indicates that
the reset is successful.
Please charge as soon as
possible.
Please contact our
after-sales service
personnel for mainte-
nance.
更换滤芯
参 考 维 护 保 养【 清 洁 滤
芯】部分拆下滤芯更换。
Refer to the maintenance
manual [Cleaning HEPA
Filter] section to remove
the filter and replace it.
Please charge as soon as
possible.
Please wait and continue
to use after motor
temperature is normal.
Check whether the dust
compartment, extension
rod, and soft roller nozzle
are blocked.
Refer to the maintenance
manual [Soft Roller
Nozzle ] section to clean
the fiber material and
roller brush.
10
How to Use
If you need to pay attention to any abnormality during the use of the
product, the screen will push a prompt message. You should follow the
instructions on the screen to keep the performance normal.
To Next Page
Loading...
Need help?
General
