Dreame Dual User Manual

7
1. Charging Contacts
2. Air-Drying Inlet
3. Air-Drying Outlet
4. Power Cord
Installation
Installing the handle
 Insert the end of the handle vertically into the port on the top of the unit until you
hear a click.
Installing the Storage Box
 Place the storage box on the charger stand.
Installing the Accessory Storage Mount
 Insert the support rod vertically into the storage mount until you hear a click.
Note: To remove the support rod, pull the tool out of the hole at the bottom of the holder.
Press the contacts together and pull the rod upwards at the same time.

Dreame Dual Specifications

General

Battery Capacity	5200 mAh
Wet Mopping	Yes
Auto Empty Station	No
App Control	Yes
Multi-floor Mapping	Yes
Auto Recharge	Yes
Carpet Detection	Yes
Scheduled Cleaning	Yes
Obstacle Avoidance	Yes
Type	Robotic Vacuum Cleaner
Noise Level	65 dB
Navigation	Laser Navigation
Voice Control	Yes
Virtual Walls	Yes