Dreame R10 Pro - How to Use: Operating Modes; Cleaning Mode Selection

8
EN
How to Use
Method 2: Continuous Cleaning Mode (Trigger switch lock)
Click the trigger switch lock to switch to Continuous Cleaning Mode when the vacuum
is running. Then release the on/o󽗈 switch to make the vacuum in Continuous Cleaning
Mode.
Use the trigger switch lock to free your 󽗉ngers and avoid 󽗉nger fatigue caused by holding
the switch.

• 
• 
Working Methods
Method 1: Discontinuous Cleaning Mode
Press and hold the on/o󽗈 switch to power it on, and release it to stop immediately.
Select from two working methods for the vacuum, based on your needs.