Dreame R10 User Manual

14
EN
Cleaning the Filter
It is recommended to clean the filter once every 4 to 6 months.
1. Remove the dust cup as shown in the
figure.
3. Clean the filter with clean water. Make
sure you rotate the filter 360° to thoroughly
and remove all dust caught in the filter.
Lightly tap the filter several times to remove
any excess dirt.
Note:
•
Only use clean water to wash the filter. Do not use detergent.
•
Do not attempt to clean the filter with a brush or finger.
2. Remove the filter from the vacuum by
pulling it down in the direction shown in the
figure.
4. Allow the filter to air dry for 24 hours.
12
6
111
57
210
48
39
24 hrs
12
6
111
57
210
48
39
24 hrs
Care&Maintenance
2
1

Dreame R10 Specifications

General

Cleaning type	Dry
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	-
Product color	White
Dust container type	Bagless
Power source	Battery
Charging time	3.5 h
Suction power	120 AW
Battery voltage	- V
Battery capacity	2.5 Ah
Maximum input power	350 W
Brush tool	Yes

Weight and Dimensions

Weight	1650 g