Dreame R10 User Manual

6
EN
Wall Mount Installation Diagram
1.
Paste the mounting template sticker on the wall. The bottom edge of the mounting template
sticker should be parallel to and about 107 cm from the ground.
2.
Use a power drill with an 8 mm drill bit to drill a hole into each marker on the mounting
template sticker, then insert a wall plug into each hole.
3.
Align the holes on the mount with the holes on the wall. Fasten it to the wall with the
included screws.
Installation
107 cm
Note:
• Thewallmountisanoptionalaccessory.Youcaninstallitbasedonyourneeds.
• Thewallmountshouldbeinstalledonacool,drysurfacewithanelectricaloutletnearby.
Priortoinstalling,ensurethattherearenoelectricalwiresorpipesinthespacedirectly
behindinstallmentposition.

Dreame R10 Specifications

General

Cleaning type	Dry
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	-
Product color	White
Dust container type	Bagless
Power source	Battery
Charging time	3.5 h
Suction power	120 AW
Battery voltage	- V
Battery capacity	2.5 Ah
Maximum input power	350 W
Brush tool	Yes

Weight and Dimensions

Weight	1650 g