25
EN
8. Take out the xing base
Ⓒ
, and reinstall the plug a1 and a2.
7. Remove the cover of storage bin. Unscrew the 2 xing screws with a
screwdriver and remove the storage bin by lifting it upward.
9. Reinstall the storage bin and tighten the 2 xing screws by a screwdriver.
Note:
Open the main water valve and angle valve at home, check and make sure
that there is no leakage at the water source.
10. Reinstall the cover of storage bin, the clean water tank and used
water tank of the base station.
Fixing Base
Ⓒ
Storage Bin
Disassembly Instruction
a2
a1
To Next Page
Loading...
Need help?
General
