Dreame RAW7 - Page 18

15
EN
3. Pull the wire organizer Ⓙ backward to wrap the water pipes and wire.
4. Place the controller assembly Ⓖ with the bottom side down in the proper
position.
Installation Instruction
❼ Tidy Up the Water Pipes and Wire
1. Clamp the water pipes and wire with wire organizer Ⓙ .
2. Thread the bottom of the wire organizer Ⓙ into the spiral cable wrap Ⓚ .
Spiral Cable
Wrap
Ⓚ
Wire
Organizer
Ⓙ
Wire Organizer
Ⓙ