16
EN
1. Before testing, please power up the base station and then open the main
water valve and angle valve at home.
2. Refer to the user manual to download and set up the app. After the device
is installed successfully, a pop-up prompt will appear in the app, please
complete the test steps according to the instructions.
3. Replug the base station and test again whether the water hookup kit can
function properly.
Test the Device
Test Method
INSTALLATION COMPLETED
Cancel Start testing
Test Notes
Note:
·Do not open the sealing cover of the water hookup kit during operation,
as the internal sealing of the water hookup kit is required for used water
drainage.
·Please follow the instructions based on the latest app version.
To Next Page
Loading...
