13
EN
Clean the Dust Bin and Filter
1. Open the robot cover, then press the dust bin clip to remove the
dust bin.
2. Open the dust bin cover as indicated by the diagram.
3. Remove the lter and tap its basket gently.
4. Rinse the dust bin and lter with water until they are clean.
Thoroughly dry the lter before re-installing.
Note: Do not attempt to clean the lter with a brush or nger.
Note:
• Only clean water should be used to clean the lter. Do not use detergent.
• Keep it in a well-ventilated or cool place.
Routine Maintenance
To Next Page
Loading...
Need help?
General
