Dreame RLS5-BL1 - Clean the Main Brush; Clean the Main Wheel; Omnidirectional Wheel; Clean the Side Brush

15
EN
Clean the Main Brush
Clean the Side Brush
Clean the Main Wheel / Omnidirectional Wheel
Press the brush guard clips inwards to remove the brush guard
and lift the brush out of the robot.
Pull out the side brush and use the included cleaning tool to
remove any hair tangled on the brush.
Pull out the brush cover as shown in the diagram. Use the
included cleaning tool to remove any hairs tangled in the brush.
Note: Use a tool such as a small screwdriver to separate the axle and the tire.
Routine Maintenance