Dreame RLS5-BL1 - Clean the Laser Distance Sensor; Returning-to-dock Sensor; Clean the Cliff Sensor; Clean the Charging Contact; Robot Restarting

16
EN
Clean the Laser Distance Sensor/
Returning-to-dock Sensor
Clean the Charging Contact
Clean the Cli Sensor
Note: Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.
Battery
The robot contains a high-performance lithium-ion battery
pack. Please ensure that it remains well-charged for daily use to
maintain optimal battery performance. If the robot is not used for
an extended period of time, turn it o and put it away. To prevent
damage from over-discharging, the robot should be recharged at
least once every three months.
Robot Restarting
If the robot stops responding or cannot be turned o, press and
hold down the button
for 10 seconds to forcefully turn it o.
Then press and hold the button
for 3 seconds to turn the robot
on.
Routine Maintenance