Scan the QR code on the robot, or search “Dreamehome” in the app store to download and install the app.
Only 2.4 GHz Wi-Fi is supported.
Due to upgrades in the app software, the actual operations may differ from the directions in this manual.
Please follow the instructions based on the current app version
2. Add Device
Open the Dreamehome app, tap in the upper right corner, and scan the same QR code on the robot again to
add the device. Please follow the prompts to finish the Wi-Fi connection.
Note: If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to finish the Wi-Fi connection..
How to Use
Turn On/Off
Press and hold the button for 3 seconds to turn on the robot. The power indicator should be illuminated. Place
To Next Page
Loading...
