What to do if my Dreame T20 Pro air duct is blocked?
If the air duct of your Dreame Vacuum Cleaner is blocked, check the dust cup, HEPA filter, pre-filter, extension rod, and smart multi-brush bar for blockages. Clean these components as described in the maintenance section and allow them to dry thoroughly before using them again.
How to fix a stuck roller brush on a Dreame T20 Pro?
To fix a stuck roller brush on your Dreame Vacuum Cleaner, clean any fiber material and hairs wrapped around the roller brush, as described in the maintenance guide section 'Cleaning the Smart Multi-Brush Bar'.
General| Cleaning type | Dry |
|---|---|
| Cleaning surfaces | Bare floor, Carpet, Hard floor, Stair steps |
| Vacuum air filtering | HEPA |
| Dirt separating method | Cyclonic/filtering |
| Air filtration stages quantity | 5 |
| Suitable for all types of surface | Yes |
| Vacuum brushes included | Roller brush |
| Brush shape | Rectangular |
| Display type | LCD |
| Product color | Blue, Grey |
| Dust container type | Bagless |
| Power source | Battery |
| Charging time | - h |
| Suction power | 150 AW |
| Battery voltage | - V |
| Number of batteries supported | 2 |
Weight and Dimensions| Weight | - g |
|---|
Safety precautions for using the vacuum cleaner, including warnings and usage guidelines.
Initial steps for cleaning the dust cup, pre-filter, and cyclone assembly.
Steps for cleaning and drying the HEPA filter.
How to clean the smart multi-brush bar, including hair removal.
Steps for cleaning the soft roller brush bar.
Instructions for cleaning the mini electric brush head.
To Next Page
