Dreame VTN1 User Manual

14
EN
InstallingtheDustCup,Pre-Filter,andCycloneAssembly
1. Insert the cyclone assembly vertically into the dust cup, and make sure that the handle
of the cyclone assembly line up with the slot on the left side of the dust cup. Turn the
handle clockwise until it locks, then 󽗊ip the handle down.
2. Place the pre-󽗉lter with its front side facing up into the cyclone assembly.
3. Slightly tilt the dust cup so the slot aligns with the clip on the vacuum. Then gently push
the dust cup until it clicks into place.
3
1
2
3
Care&Maintenance

Dreame VTN1 Specifications

General

Brand	Dreame
Model	VTN1
Category	Vacuum Cleaner
Language	English