Dremel 1100 - Drill Bit

-17-
Speed Settings (Continued)
* Speed for light cuts; Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
430, 431, 438 2-10 2-10 8 10 10 2-10 2-10 -
439, 440, 444 2-10 2-10 8 10 10 2-10 2-10 -
407, 408, 432 2-10 2-10 8 10 10 2-10 2-10 -
411, 412, 413 8-10 8-10 2 - 2 - - -
Sanding Bands and Discs
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
504, 505 10 10 2 10 10 - - -
Flapwheels
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
511 4 4 2 4 4 - - -
Finishing Abrasive Buffs
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
150 10 10 2 - 4-6 - - -
Drill Bit
BM 2610951850 08-07 8/15/07 3:50 PM Page 17