Dremel 3D40 - General Safety Warnings

p. Do not move or bump Dremel 3D40 or the
extruder during operation. The object may build
incorrectly.
q. 
during building. Doing so will cancel the object
and may damage the extruder.
r. 
Doing so may damage the
extruder.
 
Dremel 3D40 will not work
properly with damaged extruder tip and will require
replacement.
t. 

tape. Use of improper build tape may result in
equipment damage and poor object build quality.
u. 

platform. Sudden tool slip and improper body
position during object removal from the build
platform may result in personal injury.
v. 
Scratches in the build platform
will result in improper object creation.
w. Do not drop the build platform. Tempered glass
plate may break and result in personal injury.
x. 
 Contact with tempered glass plate
edge may result in personal injury.
y. 
Tempered glass plate may
separate from plastic holder and result in personal
injury.
z. 

3D40. Structural models created by inexperienced
designers may result in property damage and
personal injury.
SERVICE
a. 

Failure to do so may result in personal injury and
equipment damage.
b. 

This will ensure that
proper operation and safety of Dremel 3D40 is
maintained.
c. 
Use of object materials, or 3D
objects other than Dremel
®
approved object
materials and genuine Dremel
®
components may
void warranty.
ORIGINAL INSTRUCTIONS
GENERAL SAFETY WARNINGS
!
WARNING
READ ALL
INSTRUCTIONS IN THIS
MANUAL AND FAMILIARIZE YOURSELF
WITH THE DREMEL 3D40 BEFORE SETUP
AND USE. FAILURE TO COMPLY WITH THE
WARNINGS AND INSTRUCTIONS MAY RESULT IN
FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE,
OR PERSONAL INJURY. SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE REFERENCE
WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b. 
Dremel 3D40
creates high temperatures which may ignite the
dust or fumes.
c. 
Injury can occur in
hands of untrained users.
ELECTRICAL SAFETY
a. 
grounded outlet. Do not modify Dremel 3D40
plug. Improper grounding and modied plugs
increase risk of electric shock.
b. 

Presence of moisture increases risk of electric
shock.
c. 
pulling or unplugging the Dremel 3D40.

Damaged or entangled cords
increase the risk of electric shock.
d. 
There may be a remote risk of a power
surge from lightning that may result in an electric
shock.
e. 
outlet.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and



or medication. A moment of inattention while
operating Dremel 3D40 may result in personal
injury.
b. The use of
protective equipment such as heat resistant gloves
and safety glasses will reduce the risk of personal
injuries.
c. 

Loose clothes, Jewellery
or long hair can be caught in moving parts.
DREMEL 3D40 USE AND CARE
a. 





Use of Dremel 3D40 when
damaged may result in poor quality of object
creation, further equipment damage, property
damage or personal injury.
b. Do not touch the extruder tip during Dremel

Contact with the extruder tip
during or after operation before tip has cooled may
result in personal injury.
c. Set up the Dremel 3D40 in a well-ventilated

Dremel 3D40
melts plastic during building. Plastic odours emitted
during Dremel 3D40 operation may irritate eyes
and airways. Locating Dremel 3D40 close to
surrounding objects prevents proper ventilation.
d. 
in operation. Contact with Dremel 3D40 moving
parts during operation may result in poor build
quality, equipment damage or personal injury.
e. Do not leave the Dremel 3D40 unattended
during operation. Use of Dremel 3D40 by persons
unfamiliar with these warnings and instructions may
result equipment or property damage and personal
injury.
f. Use of lament
not authorized by Dremel may result in equipment
and property damage.
g. 
Small
objects are potential choking hazards for young
children.
h. 

i. 

Plastic may melt when
exposed to re or other heat sources. Such use of
objects created by Dremel 3D40 may result in re,
property damage and personal injury.
 


Such use of objects created by
Dremel 3D40 may result in illness or personal
injury.
k. 

PLA plastic
is not suitable for electrical applications. Such use
of objects created by Dremel 3D40 may result in
property damage and personal injury.
l. 
mouth. PLA plastic is not suitable for food or drink
preparation and food utensils. Such use of objects
created by Dremel 3D40 may result in illness or
personal injury.
m. 
PLA plastic is not
suitable for chemical storage. Such use of objects
created by Dremel 3D40 may result in property
damage and personal injury.
n. Do not modify Dremel 3D40 or alter factory
Modications may result in equipment
and property damage, and personal injury.
o. 
Dremel 3D40 may
become damaged. Dremel 3D40 is intended to
operate in temperature between 16-29° C
(60 - 85° F).
GB
2