To Next PageTo Next PageWhy is there only partial frost or moisture on the coils of my Dri-Eaz DRIZAIR 120 Dehumidifier?
If you notice only partial frost or moisture on the coils of your Dri-Eaz dehumidifier, it could indicate a possible leak in the system. Use a gas leak detector to check for leaks. Alternatively, the system may have a low charge, requiring repair and recharge.
Why is there no moisture or frost on the coils of my Dri-Eaz DRIZAIR 120?
If there is no moisture or frost on the coils of your Dri-Eaz dehumidifier, this could be due to a possible leak in the system, so check for a leak with a gas leak detector. Another cause could be damaged capillary tubing, so inspect for damage and replace the tubing if necessary. Finally, the compressor might not be running; refer to the Compressor Section for troubleshooting.
General| Brand | Dri-Eaz |
|---|---|
| Model | DRIZAIR 120 |
| Category | Dehumidifier |
| Language | English |
Reduce risk of electrical shock, fire, or personal injury by following warnings.
Keep unit grounded, protect cord from damage, and keep electrical components dry.
Avoid water exposure and keep children away from the operating unit.
Handle with care, secure during transport, and do not modify the unit.
Steps to resolve issues when the dehumidifier does not turn on.
Diagnosing why the compressor will not start or run.
Solutions for fan not turning or room not drying effectively.
Addressing partial frost, no frost, or moisture on coils.
Troubleshooting water overflows and peristaltic pump malfunctions.
