EasyManua.ls Logo

Dri-Eaz 110128 - User Manual

Dri-Eaz 110128
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
110489Q #110128 (F410), #110133 (F411) 1 Legend Brands, Inc.
Owner’s Manual
LGR 2800i Portable Dehumidifier #110128 (F410)
LGR 3500i Portable Dehumidifier #110133 (F411)
Legend Brands, Inc.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 LegendBrandsRestoration.com
The Dri-Eaz
®
LGR i-Series dehumidifiers reduce humidity in enclosed structural environments by
removing water vapor from the air. The i-Series product line is engineered to be rugged, durable and
highly portable, making them ideally suited for water damage restoration, structural drying,
construction, and other applications requiring temporary, high-performance dehumidification.
Patents: LBpatents.com
READ AND UNDERSTAND BEFORE OPERATING
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your unit in any
way. Use only replacement parts authorized by
Dri-Eaz Products, Inc. Modifications or use of
unapproved parts could create a hazard and will
void your warranty. Contact your authorized
distributor for assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
Keep motor and wiring dry.
Do not attempt to repair the unit. For Authorized
Service Centers, contact Dri-Eaz.
NOTICE: Do not use in environments where
corrosive chemicals are present, such as chlorine.
BEFORE YOU BEGIN
Warranty registration
Visit warranty.LegendBrandsRestoration.com to register
your purchase. Registration allows us to better assist
you with using, maintaining or servicing your equipment
and to contact you in case we have important safety
information concerning your Dri-Eaz product. If you
determine service is required, have your equipment
model, serial number and original proof of purchase
available and call your distributor for assistance with
obtaining a return material authorization (RMA).
WARNING
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or
dehumidifier resulting from improper removal of
the power cord is not covered by warranty. The
IEC power cord is a wear item and is not covered
by warranty.

Other manuals for Dri-Eaz 110128

Questions and Answers

  • A
    Amanda CastilloAug 15, 2025
    Why is my Dri-Eaz 110128 Dehumidifier not working?
    • M
      michael64Aug 15, 2025
      If your Dri-Eaz Dehumidifier isn't operating, make sure the unit is switched on and properly plugged into a working power outlet. Check the power cord connection both at the wall and at the base of the unit.
  • D
    Daniel BradyAug 18, 2025
    What to do if my Dri-Eaz 110128 Dehumidifier is running but the room isn't drying?
    • A
      Aaron HenryAug 18, 2025
      If your Dri-Eaz Dehumidifier is running, but the room isn't drying, it could be due to several reasons. First, allow more time for drying. Second, increase air movement in the room using air movers. Finally, reduce moist air infiltration into the room.
  • A
    Alexis French DVMAug 21, 2025
    Why is my Dri-Eaz 110128 Dehumidifier not turning on?
    • M
      Mitchell JonesAug 22, 2025
      If your Dri-Eaz Dehumidifier isn't operating, it could be due to a lack of power or the unit not being switched on. Ensure the unit is plugged in and check the power at both the outlet and the base of the unit. Also, make sure to switch the unit on.
  • R
    Robert CarterAug 25, 2025
    What to do if my Dri-Eaz 110128 Dehumidifier collects too little water?
    • J
      Justin OlsonAug 26, 2025
      If your Dri-Eaz Dehumidifier is collecting too little water, it could be because the room air is too dry or the room temperature is too low. Check the humidity using a hygrometer and increase the room temperature. Also, inspect the filter and coils and clean them if necessary.
  • T
    thomas44Aug 28, 2025
    What to do if Dri-Eaz Dehumidifier collects too little water?
    • M
      Mary NelsonAug 29, 2025
      If your Dri-Eaz dehumidifier isn't collecting enough water, check the humidity with a hygrometer, increase the room temperature, and inspect the filter and coils, cleaning them if necessary. This might be happening because the room air is dry or the room temperature is too low.
  • B
    Brandy AndersonSep 1, 2025
    Why Dri-Eaz Dehumidifier does not operate?
    • E
      Evan WellsSep 1, 2025
      If your Dri-Eaz dehumidifier isn't operating, plug in the unit, check the power at the outlet and at the base of the unit, and switch the unit on. This issue may arise from a lack of power to the machine or the unit not being switched on.
  • S
    Sean FieldsSep 4, 2025
    How to fix Dri-Eaz Dehumidifier blower wheel not turning?
    • K
      kellydawnSep 4, 2025
      To fix a Dri-Eaz dehumidifier with a blower wheel that isn't turning, remove the duct ring and grill, remove any obstruction, and then replace the duct ring and grill. This is likely due to an obstructed blower.
  • S
    Sandra SandersSep 7, 2025
    How to fix a Dri-Eaz 110128 Dehumidifier blower wheel that is not turning?
    • K
      Kristin ChanSep 7, 2025
      If the blower wheel of your Dri-Eaz Dehumidifier is not turning, it's likely due to an obstruction. Remove the duct ring and grill, then remove any obstruction. After that, replace the duct ring and grill.
  • A
    Audrey NguyenSep 12, 2025
    What to do if Dri-Eaz Dehumidifier is operating, but room is not dry?
    • E
      Elizabeth MendezSep 12, 2025
      If your Dri-Eaz dehumidifier is running but the room isn't drying, allow more time for drying. Increase air movement with air movers. Reduce infiltration. The causes might be not enough time to dry, poor air movement in the room, or excessive moist air infiltration.

Dri-Eaz 110128 Specifications

General IconGeneral
BrandDri-Eaz
Model110128
CategoryDehumidifier
LanguageEnglish

Related product manuals