7
Camera Modes
VIDEO MODE
(Green LED) Press the button to start
recording. The Status LED and LCD backlight
will flash red to indicate recording. Press the
button again to stop recording.
VIDEO SETTINGS
• Resolution
• Frame Rate
PHOTO MODE
(Yellow LED) The camera will capture still images
when the button is pressed, and the status
LED and LCD screen will flash red each time a
photo is captured.
PHOTO SETTINGS
• Resolution
CHANGE SETTINGS
In any mode press the button to highlight a setting.
Press the button to change the option for the highlighted setting.
TIMELAPSE MODE
(Purple LED) Press the button to capture
a series of still images at a specified rate. The
Status LED and LCD screen will flash red each
time an image is captured. To stop recording,
press the button once more.
TIMELAPSE SETTINGS
• Resolution
• Timelapse Interval
PHOTOBURST MODE
(Cyan LED) The camera will capture a burst
of still images for an allotted duration and
at a specified rate, when the button is
pressed. For best results, use a memory card
with the highest possible data rate.
PHOTOBURST SETTINGS
• Resolution
• Burst Duration/Capture Rate
To Next Page
Loading...
Need help?
General
