EasyManuals Logo

DRIFT HD Ghost User Manual

DRIFT HD Ghost
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
conserving battery
The HD Ghost comes with a rechargeable 1700mAh Lithium-Ion battery, allowing
you to record continuously for hours between charges. However, sometimes you
may find yourself in a location without a power outlet to charge your camera. If
you’re outside, cold conditions can drain battery power at a faster rate than usual.
Fortunately, the HD Ghost comes with a number of features to conserve the
battery life. These can all be found in the Camera Settings menu.
LCD O
The camera’s LCD screen consumes power, so one of the best ways to
extend battery life is to use the ‘LCD O’ feature. By default, LCD screen will
automatically power o after 20 seconds (the time interval can be chosen when
selecting ‘LCD O’ from the Camera Settings menu).
The camera will still function as normal when the screen is o: in Live Preview,
the camera is ready to record at any time; and if recording is in progress, the
camera will continue to record. The remote can also be used while the screen is
o. The screen can be turned back on again at any time by pressing any button.
LCD Brightness
The LCD screen is backlight, and this too consumes power. It is possible to
reduce the intensity of this light by adjusting the ‘LCD Brightness’ setting in the
Camera Settings menu—you will notice a slight increase in battery life if you use
a lower brightness setting.
Camera Auto O
It is possible to set the camera to power o entirely when no buttons are pressed
for a number of minutes (the duration can be chosen selecting ‘Camera Auto
O’ from the Camera Settings menu). This can be useful to reduce battery
consumption if the camera is accidently left powered on.
! The camera will not power o while recording is in progress. However,
once the camera has powered o, you will need to power it on again before
capturing any footage.
! The remote control will not operate the camera while the unit is powered o.
Spare batteries
You can also charge a second battery
before you set out and then swap it
when the first is empty. Spare 1700mAh
Ghost batteries and Power Packs are
available from ocial Drift retailers.
Please visit driftinnovation.com for more
information and where to purchase.
! Always change the battery in a
clean, dry and safe environment.
Getting camera batteries wet will
damage them and may result in
injury to yourself. For your own
safety, never use damaged batteries.

Other manuals for DRIFT HD Ghost

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DRIFT HD Ghost and is the answer not in the manual?

DRIFT HD Ghost Specifications

General IconGeneral
Video resolutions1280 x 720, 1280 x 960, 1920 x 1080 pixels
Maximum frame rate120 fps
Supported video modes1080p, 720p, 960p
Video formats supportedH.264, MOV, MP4
Maximum video resolution1920 x 1080 pixels
Photo modeYes
Sensor typeCMOS
Light exposure modesAuto, Manual
Display diagonal2 \
USB connector typeMini-USB B
USB 2.0 ports quantity1
Internal memory0.256 GB
Compatible memory cardsmicroSD (TransFlash), microSDHC
Maximum memory card size32 GB
GPS (satellite)No
Product colorBlack
Protection featuresWater resistant
Battery voltage3.7 V
Battery capacity1700 mAh
Battery life (max)- h
Weight and Dimensions IconWeight and Dimensions
Depth33 mm
Width52 mm
Height105 mm
Weight167 g

Related product manuals