18
updating firmware
The Drift HD Ghost should always be operated on the latest firmware available,
downloadable from http://www.driftinnovation.com. Be sure to check back
often for updates as we will continue to add features and options to your
camera after you purchase it
We have refined how we update the firmware on the HD Ghost and it can be
done easily by following the simple steps below which are
1) Go to www.driftinnovation.comn and download the latest firmware file (‘’HD_
Ghost.bin’’) which will be found easily in the Drift HD Ghost section, or by
navigating to ‘Firmware’ listed in the bottom footer of any page
2) Plug your Drift HD Ghost unit into your computer (MAC or PC) using the
supplied USB cable
3) Your camera should come up as an External Device with the ‘’Drift Card’’
Micro SD card being visible as a storage device (see connectivity p16). Please
copy the ‘’HD_Ghost.bin’’ firmware file into the root folder of the ‘’Drift Card’’
Micro SD card
4) Safely eject your Drift HD Ghost and Micro SD as a storage device from your
computer
5) Power on the camera and wait for it to automatically update itself. You will get
a “Firmware update in Progress” message, and the LED status indicator will
blink red. This should take a few seconds and the camera will automatically
power o after
6) Navigate to the settings menu and check the “Firmware Version” to ensure the
firmware has been successfully updated
To Next Page
Loading...
Need help?
General
Weight and Dimensions
