Drive DeVilbiss AQUAJOY VALUE - Attaching and Removing the Covers

Installation and use
 Attaching and removing the covers
The covers can be attached and removed very
easily.
To attach the cover, place it correctly on the surface
of the backrest and press the fastening buttons
completely into the holes provided in the backrest
and seat (or seat and side flaps see illustration).
Backrest Cover
Backrest Cover
Seat Cover (Comfort Cover Shown)
Seat Cover
 To remove the covers, lift the two fastening
buttons with two fingers; then pull them out.
The bathlift can also be used without covers.
10