4. Now the drive unit can be removed from the
seat unit in the direction of the arrow (see
illustration)
Note: The drive unit can only be removed at a
specific angle. When it is completely folded down
and locked, it cannot be removed from the seat
unit. Bring the backrest into the position shown in
our illustration; then remove the drive unit in
the
direction of the arrow
5. Remove the two rear suction cups by pulling the
tongues. Then lift off the rear part of the
baseplate. This action will loosen the front
suction
cups, which are self-venting. The seat
unit can now
be removed from the bathtub.
To Next Page
Loading...