5
ENVIRONMENT REQUIREMENTS & CLEANING GUIDELINES
Operation Temperature
50℉~95℉ (10℃~35℃)
Storage Temperature
5℉~122℉ (-15℃~50℃)
Operation Humidity
20%~80% Non-condensing
Storage Humidity
10%~90% Non-condensing
CONTROL UNIT & MATTRESS MAINTENANCE
In this section, we describe the procedures to clean and decontaminate the control unit and mattress.
It is important to follow these procedures before using the system again.
The cleaning task is required at least once a week to maintain personal hygiene.
• Can be cleaned by disinfectant solution.
• Do not immerse the control unit in liquids.
• Do not heat or steam in autoclave.
• The mattress and cover should be aerated to fully dry.
To Next Page
Loading...
