25
If there are any signs of damage, or the Powerstroll is not performing as it
should, withdraw it from service until the Powerstroll has been repaired and is
fit for use.
Preventative maintenance is key to keeping the Powerstroll in prime
operating condition. Follow the Maintenance Schedule at the end of this
manual to periodically inspect the Powerstroll for serviceable items.
• Avoid knocking or abuse to the control unit
• Avoid prolonged exposure to extreme heat or cold
• Keep the Powerstroll clean and free from moisture
• Never use a conditioner on the tread of the wheels
• Check for the presence of flat spots on the tyres
• Check all electrical connections, ensuring they are fastened and not
corroded
• Check all components for loose fasteners and tighten where appropriate
The following conditions may indicate a serious problem with your Powerstroll.
Contact Drive DeVilbiss Healthcare Ltd. if one of the following conditions
occurs:
• Motor or gearbox noise
• Frayed electrical cables
• Cracked or broken connections
• Uneven wear on the tyres
• Veering to one side when steering straight
• Bent or broken wheel assemblies
• Will not power on
All wheel bearings have been lubricated and sealed. They should not require
subsequent lubrication during maintenance.
If in doubt about the correct replacement of a component, contact Drive
DeVilbiss Healthcare Ltd.
To Next Page
Loading...
