EasyManua.ls Logo

Drive DeVilbiss Lightweight Powerstroll - Maintenance & Servicing; General Guidelines

Drive DeVilbiss Lightweight Powerstroll
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
11. MAINTENANCE & SERVICING
11.1 General Guidelines
Routine maintenance is required to ensure the maximum use of your
Powerstroll. While some of the maintenance can be done by yourself, you may
need assistance from an authorised service engineer. If you have any doubts,
contact Drive DeVilbiss Healthcare Ltd.
Always disconnect the Powerstroll from the main power
supply and remove the battery prior to performing any
maintenance procedures (where viable).
Never attempt to deconstruct the enclosures, re-wire
any components or replace internal battery components.
Modification of the Powerstroll is not allowed without the
permission of the manufacturer and electrical system
components are only to be replaced by authorised service
personnel.
No maintenance or servicing should be conducted while the
device is in use – risk of electric shock, entrapment, loose
parts, etc. If not possible due to the occupant’s mobility, a
risk assessment should be carried out, and if deemed safe
to proceed, care should be taken to avoid contact with the
occupant when working on electrical items.
Failure to carry out the following checks at the stated
frequencies could negatively influence the essential
performance of the Powerstroll and as a result put
individuals at risk.
Allow all components to cool before performing
maintenance. Parts of the motor system can generate heat
while moving.
Warning
All maintenance should be conducted by a competent person.
Disassembling the controller, motor, or charger by anyone other
than an approved service engineer is prohibited and voids any
applicable warranty. For any maintenance concerns, contact
Drive DeVilbiss Healthcare Ltd.
Caution

Related product manuals