Cobra Electric Scooter Page 6 of 16 Owner’s Handbook (Code: KCobra_IFU 01/14)
4.1 Control Panel and LCD Display
4.2 How To Operate Your Scooter
Key Ignition. The key ignition acts as the power
switch for the scooter. To switch the power on, turn
the key clockwise and LCD display should
illuminate. To switch the power off, turn the key
anticlockwise, after which the display should switch
off and the key can be removed.
Do not turn the ignition off whilst driving
as this will lead to an emergency stop and
possible risk of damage or injury.
Wigwag Paddle. The scooter is propelled by the
user operating the wigwag paddle at the bottom of
the control panel. To move the scooter forward,
move the right hand side of the paddle towards the
user. To reverse the scooter, move the left hand
side of the lever. The further the paddle moves, the
faster the scooter will travel. To stop the scooter,
release the wigwag paddle and the
electromagnetic brake will apply automatically.
Warning
Do not push both left and right hand
sides of the wigwag simultaneously. You
will not be able to control the scooter.
Braking.
The electromagnetic brake will stop the scooter
when the wigwag paddle is released. The brake is
also automatically applied when the scooter is
To Next Page
Loading...
Need help?
General
