Drive M-Rail - Page 3

M-Rail installation instructions
3
Installing the M-Rail assembly onto the bed:
8. SlidetheassembledM-Railbetweenthemattressandhebedbaseorbedframesupport.
9. RuntheLongWebbing(part111)acrossthebase/bedframeandunderneath,backtotheM-Rail.
10. FeedtheLongWebbing(part111)throughthebuckle(part107)atthedesiredlength.Closethebuckle(part107)tosecurethestrap.
11. Putthemattressbackonthebedifyouremovedit.
12. LieonthebedandpositiontheM-Railwhereitismostcomfortableforyou.
13. Tightenthetwowebbingstrapssecurelyagainstthebaseorbedframe,ensuringthatthewebbingstrapsarestraightandparallel.
14. LoopanddoubletiethelooseendoftheLongWebbing(part111)directlyunderneaththebuckle(part107).Cutofftheexcessweb-
bingofLongWebbing(part111)topreventtrippinghazards.

Installer quick tip: Youwillndtheinstallationeasierifyouremovethemattress.
E
107
A
A
C
B
B
111
E
107
A
A
C
B
B
C
111
M-Rail Low Profile
Installed on bed
base/bed frame
M-Rail
Low Profile
M-Rail High Profile
Installed on bed
base/bed frame
M-Rail
High Profile
M-Rail Low Profile
Installed with
Mattress
M-Rail High Profile
Installed with
Mattress
Note:Mattress
tobeadded
Note:Mattress
tobeadded