Instruction BookletST-3
Function Of Parts：
7
TOP CONTROL PANEL
•Speed Dial Knob
The image of rabbit means fast or high speed. The image of turtle means slow or low
speed. By turning this knob towards chosen image you can control overall speed of the
vehicle.
•Self Diagnostic Warning Light
Flashing light indicates there is a problem within scooter. See page 18 for more
information.
•Battery Gauge
The meter gives an approximation of battery strength. Green indicates a fully charged
battery. Without any Green light means no power, required to charge batteries immediately.
ADJACENT TO TOP CONTROL PANEL
•Thumb Lever
Pushing right thumb lever forward moves scooter forward. Pushing left thumb lever
forward will move scooter backward. (This configuration can be reversed if required
by local authorized dealer.) While in use this lever is also your accelerator. The further
you depress the thumb lever, the faster you will go. (NOTE: subject to the position of
the rabbit/turtle control). Releasing the thumb lever engages the automatic brake.
AT BASE OF TILLER
•Tiller Angle Adjustment
Rotate the Hand Wheel Tiller Angle Adjustment to adjust your most comfortable angle.
BELOW SEAT
•Seat Lock Knob
There are three holes on seat post to adjust seat height. Be sure detent pin is fully
inserted at its new height and bolt is tightened.
•Seat Rotation Lever
Lift lever to rotate seat. Please be careful when getting on or off scooter with seat in a
swiveled position. The stability of seat may be compromised.
To Next Page
Loading...
Need help?
General
