Trident Owner’s Manual www.drivemedical.com
Step 4:
Attach the seat onto the base of the
power wheelchair by aligning the rear
“U” shaped hooks with the pins on the
seat frame.
Step 5:
With the seat on the base of the power
wheelchair, insert the quick-release pin
through the bracket on the bottom of
the seat through the seat frame, and lock
into place.
Step 6:
Fully charge the power wheelchair by
inserting the round charger connector
into the battery charging terminal on the
front of the controller, and then insert
the 3-pronged plug into a standard
electrical outlet.
To Next Page
Loading...
