Drive Trident - VI. ASSEMBLY; Step 1: Attach Armrests; Step 2: Secure Armrests; Step 3: Connect Battery and Joystick Harnesses

Trident Owner’s Manual www.drivemedical.com
16
Your power wheelchair requires assembly prior to initial use. Please be sure to follow
these steps to properly set up your power wheelchair.
Step 1:
Attach the armrests to the power
wheelchair base by inserting the
armrests into the attachment points on
the seat frame.
Step 2:
Secure the armrests by tightening the
star knobs on the back of the seat frame.
Step 3:
Make sure the power wheelchair’s
battery harnesses are connected. Then
route the joystick harness under the seat
frame to connect to the power module.
VI. ASSEMBLY