WIRED USE
The headphone has a 3.5mm TRS jack on the bottom of the left earcup which
allows the headset to work as a wired passive headphone. The headphone will
automatically turn off when a plug is inserted. The directional button will be
unresponsive while the plug is inserted.
CLEANING
The headphones do not require special cleaning. Should cleaning become
necessary, simply wipe the outside surfaces with a soft, dry cloth. Avoid using
liquids or sprays. Do not allow moisture to get inside the earpieces or the
audio or power inputs.
LED MEANINGS
SIGNAL MEANING
Blue
Powering on
Red
Powering down
Blue fading on then off
Pairing with Bluetooth
Red fading on then off Charging
Two blue flashes Soft reset
Two short blue flashes every 3 seconds Powered on
Red fast flashes Quick charging
9 HOW TO USE
To Next Page
Loading...
