HOW TO USE
WEARING
The directional button should be on right side. The headband is adjustable.
Adjust so the earpieces are comfortably covering the ears.
TURN ON/OFF
1
Locate the directional button on the bottom of the right earpiece.
2
To turn on, press and hold for two seconds until the LED indicator turns
white. An audio cue will sound.
3
To turn off, press and hold the button for three seconds until the white
LED fades. An audio cue will sound.
PAIR BLUETOOTH
1
Locate the directional button on the bottom of the right earpiece.
2
When powering off, press and hold for four seconds.
3
While pairing, the LED indicator will blink blue and red. Pairing is success-
ful once the LED illuminates white.
ADDITIONAL BLUETOOTH NOTES
■
The effective range is approximately 30 feet (10 meters).
■
The pairing memory can accommodate up to eight devices.
6 HOW TO USE
To Next Page
Loading...
Need help?
General
