243
Checks
DS5_en_Chap09_verifications_ed02-2015
Bonnet
Opening
Before doing anything under the
bonnet, switch off the Stop & Start
system to avoid any risk of injury
resulting from an automatic change to
START mode.
Closing
F Lower the bonnet and release it at the end
of its travel.
F Check that it is latched correctly.
F From the outside: lift the safety catch and
raise the bonnet.
A bonnet strut opens the bonnet and holds it
open.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, ...) be limited.
The cooling fan may start after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
F From inside: pull the release lever, located
on the left below the dashboard, towards
you.
To Next Page
Loading...
Need help?
General
