Car washing machine or tunnel
Some car washing machines or tunnels (where the vehicle is moved forwards on a travelling track) require that the parking brake be "released" during
the wash.
With the Hybrid4 system active, READY lamp on, parking brake
released:
) Place the gear selector at position N .
) Switch off the Hybrid4 system (press the START/STOP
button). The READY lamp goes off in the instrument panel
and the parking brake is applied automatically.
) Switch on the ignition again (press the START/STOP button)
without your foot on the brake pedal. The READY lamp
remains off.
) Release the parking brake using the manual control on the
centre console, while keeping your foot on the brake pedal.
) Switch off the ignition (press the START/STOP button without
your foot on the brake pedal) after having checked that the
parking brake remains released.
If the HDi Diesel engine was on standby, it then restarts.
If the HDi Diesel engine is running, its operation is maintained
without time limit.
With the Hybrid4 system active, READY lamp on, parking brake
released:
) Place the gear selector at position N ( AUTO mode).
) Press the brake pedal then the " ECO OFF " button.
Car washing machines or tunnels in which the HDi
Diesel engine must be switched off.
Car washing machines or tunnels in which the HDi
Diesel engine must not be switched off.
If possible on your vehicle, deactivate the automatic operation of the electric parking brake in the vehicle systems configuration menu.
To Next Page
Loading...
Need help?
General
