57
Acc ess
DS5_en_Chap02_ouvertures_ed02-2015
Back-up key
Unlocking / Locking using the integral key with Keyless
Entry and Starting
The integral key is used to lock and unlock the
vehicle when the electronic key cannot operate:
- cell battery flat, vehicle battery discharged
or disconnected, ...
- vehicle located in an area with strong
electromagnetic signals.
F Maintain a pull on button 1, to extract the
integral key 2.
If the alarm is activated, the audible
signal triggered on opening a door
with the key (integral with the remote
control) will stop when the ignition is
switched on.
Locking the driver's
door
F Insert the integral key in the door lock, then
turn it to the rear.
Unlocking the driver's
door
F Insert the integral key in the door lock, then
turn it to the front.
To Next Page
Loading...
Need help?
General
